Use of Sacrificial Anodes in Engineering

Use of Sacrificial Anodes in Engineering

Metal is a very helpful item, no matter what it is used for. In just about any device or product, you are going to find some bit of metal. This is a common material used in engineering services, so it is also important for the product the product to be protected. The metal often comes in contact with external elements, water, direct sunlight, moisture or an odd combination of both that cause the metal to brake down and begin to corrode. Once metal starts to corrode it is going to reduce the quality of the metal and lessen the structural support of it. Do to this, something known as a sacrificial anode is used. The sacrificial anode is an active metal that is generally placed on top of the stronger metal in order to prevent it from corroding. This way, the metal is always secure and safe, without having to deal with the dangers and reduced quality of a decoding piece of equipment.

The sacrificial anode is used on a large number of products and devices, to ensure the equipment is always working properly. At, this ranges from vehicle engines to boat anchors and just about everything else in between. All of these items are hard working and need to have the best maintenance in order to function correctly. A good portion of these devices come in contact with water and moisture, or at least liquids from other devices on a continual basis. Without the anodes, the equipment is more likely to deteriorate and brake down after a shorter period of time, which not only reduces the quality of the metal, but it also makes it more expensive to maintain the equipment. If the equipment is not able to be maintained the company is going to have to replace the material more often, which becomes incredibly expensive. All of this is necessary, if the anodes are not utilized.

Some companies many not want to opt into the anode application to their parts, as it is just an added expense, but it is a far more expensive method to opt out of the anode application and engineering services to just leave the traditional metal exposed. When this happens, it is going to cost more money in the long run and make it that much more difficult for the company to function properly. This is exactly why the anode engineering services should be utilized.

Do You Know What is a Ballast Water Treatment System? Continue Reading

Function, maintenance of your outboard’s sacrificial anode